Sam Angelo Videos

Details: Written by: WYOMINGWOODTURNER; Category: Sam Angelo Videos; Published: 24 August 2025; Created: 28 February 2013; Last Updated: 28 February 2013; Hits: 759

In part 2 of this project, Sam Angelo finishes threading and turning a blackwood finial with left hand threads. With left hand threads on the finial, he turns it with the lathe spinning in reverse.

Details: Written by: WYOMINGWOODTURNER; Category: Sam Angelo Videos; Published: 24 August 2025; Created: 27 May 2013; Last Updated: 27 May 2013; Hits: 820

In the 2nd part of this 5 part series, Sam finishes the bottom of the large bowl and turns a tenon for fixing to his scroll chuck. NATURAL EDGE PART 2

Read more: NATURAL EDGE BOWL: part 2

Details: Written by: WYOMINGWOODTURNER; Category: Sam Angelo Videos; Published: 24 August 2025; Created: 27 May 2013; Last Updated: 27 May 2013; Hits: 754

Sam takes a cored box elder bowl and finishes it inside and out. this is part 4 of a 4 part series. Natural edge bowls: part 4

Details: Written by: WYOMINGWOODTURNER; Category: Sam Angelo Videos; Published: 24 August 2025; Created: 03 December 2013; Last Updated: 03 December 2013; Hits: 882

Sam covers his process for breaking up turquoise stone and separating it into various sizes. He shows different strainers and techniques for processing turquoise bought off the internet as well as jewelry

Details: Written by: WYOMINGWOODTURNER; Category: Sam Angelo Videos; Published: 24 August 2025; Created: 03 December 2013; Last Updated: 03 December 2013; Hits: 1059

Sam covers the importance of being safe when turning spindles on the lathe. He offers some tips on preventing injury and accidents while using the spindle roughing gouge as well as mounting wood between

Page 5 of 86

Turned Box with Threaded Lid and Finial part 2

NATURAL EDGE BOWL: part 2

Finishing a Natural edge Bowl: part 4

TURQUOISE PROCESSING Stone for Inlay work

Spindle Turning Safety for the Wood Lathe

Articles

Articles - Most Read