Cast resin, Wood, Bubinga

Buy Now

Decorative Cast resin Sculpture with Bubinga base (Item # III 15)

Hand-Made Box Elder Burl Roadster Pen

Buy Now

This pen has been made using an Apprentice Roadster style pen kit. The burl wood is Box Elder, which is in the maple family. Care has been taken to apply several layers of color into the wood and then sealed with a super glue (cyanoacrylate) and friction polish finish. This Box Elder burl is native to Wyoming, grew in the Big Horn Mountains and then harvested near Ten Sleep, Wyoming. My pens have a 100% guarantee that covers workmanship and your satisfaction.

Ash hollow form (X-35)

Buy Now

American Ash hollow form; 4" tall x 5" wide (X-35). This hollow form was turned when the wood was green causing it to warp and elongate through the pith. The pith has been left in the piece which is highlighted by the dark grain. Leaving the pith in, straight through the middle of the piece, is a technique that is seldom used. The reason is it "usually" results in splits and cracking around the pith. As you can see this hollow form is a success.

  • Cast Resin Art at ETSY
  • Pens at ETSY
  • Hollow form at ETSY
Skip to content
Landing page show after 3 seconds.
Sam Angelo
fine art and how-to
Toggle Navigation
  • Home
  • Watch Video
  • Gallery 1
  • Gallery 2
  • Gallery 3
  • Gallery 4
  • Gallery 5
  • Wyoming Woodturner
  • ETSY

Sam Angelo At ETSY

ETSY AD
Filters
List of articles in category Videos and Notes
Title Author Hits
Notes From the Turning Shop November 2020 with Sam Angelo Written by WYOMINGWOODTURNER Hits: 184
Turning a Birdhouse Ornament for the Hill Country Woodturners November 12, 2020 with Sam Angelo Written by WYOMINGWOODTURNER Hits: 207
My "Interactive Remote Demonstration" (IRD) Setup with Sam Angelo Written by WYOMINGWOODTURNER Hits: 70
How and When to use Certain Woodturning Tools Part II Sam Angelo Written by WYOMINGWOODTURNER Hits: 100
Notes From the Turning Shop October 2020 with Sam Angelo Written by WYOMINGWOODTURNER Hits: 148
How and When to use Certain Woodturning Tools Part I with Sam Angelo Written by WYOMINGWOODTURNER Hits: 152
Live Remote Demonstration - on Embellishing wood for the Rocky Mt. Woodturners 10/8/20 Sam Angelo. Written by WYOMINGWOODTURNER Hits: 188
Organizing Woodturning Tools with Sam Angelo Written by WYOMINGWOODTURNER Hits: 109
Turned Bell Ornament with Sam Angelo Written by WYOMINGWOODTURNER Hits: 108
Live Remote Demo on Thread Chasing for the Oregon Coast Woodturners-September 19, 2020 Sam Angelo Written by WYOMINGWOODTURNER Hits: 107

Page 2 of 61

  • 1
  • 2
  • 3
  • 4
  • ...
  • 6
  • 7
  • 8
  • 9
  • 10
  • You are here:  
  • Home
  • Watch Video

Advertisement Top 4

40/40 Setup Block

(2574)

More Ron Brown's Best

(2450)

Longworth Type 2 Combo

(2322)

Doughnut Chuck Lite

(2192)


Powered by OrdaSoft!

Most Read

  • Sharpening a Bowl gouge with Swept-back Wings: Woodturning and Sharpening
  • Moving Forward----Sam Angelo, woodturning
  • DETAIL GOUGE---WoodTurning Fundamentals Sam Angelo
  • Completing a Rough-Turned Bowl on the Wood Lathe
  • Ron Brown's "Universal" And "Quad" Setting Jigs------- Review by Sam angelo
  • Jam Chuck for Reversing a Turned bowl
  • FUNdamentals of Woodturning: Sharpen a Scraper
  • Making a Point Tool with Sam Angelo
  • Oneway 1224 Lathe modifications
  • Making and Using a Friction drive: Woodturning
Main Menu
  • Home
  • Watch Video
  • Gallery 1
  • Gallery 2
  • Gallery 3
  • Gallery 4
  • Gallery 5
  • Wyoming Woodturner
  • ETSY

We have 138 guests, no bots and no members online

Tweet
Instagram
Powered by OrdaSoft!

Back to Top

© 2021 Sam Angelo