Cast resin, Wood, Bubinga

Buy Now

Decorative Cast resin Sculpture with Bubinga base (Item # III 15)

Hand-Made Box Elder Burl Roadster Pen

Buy Now

This pen has been made using an Apprentice Roadster style pen kit. The burl wood is Box Elder, which is in the maple family. Care has been taken to apply several layers of color into the wood and then sealed with a super glue (cyanoacrylate) and friction polish finish. This Box Elder burl is native to Wyoming, grew in the Big Horn Mountains and then harvested near Ten Sleep, Wyoming. My pens have a 100% guarantee that covers workmanship and your satisfaction.

Ash hollow form (X-35)

Buy Now

American Ash hollow form; 4" tall x 5" wide (X-35). This hollow form was turned when the wood was green causing it to warp and elongate through the pith. The pith has been left in the piece which is highlighted by the dark grain. Leaving the pith in, straight through the middle of the piece, is a technique that is seldom used. The reason is it "usually" results in splits and cracking around the pith. As you can see this hollow form is a success.

  • Cast Resin Art at ETSY
  • Pens at ETSY
  • Hollow form at ETSY
Skip to content
Landing page show after 3 seconds.
Sam Angelo
fine art and how-to
Toggle Navigation
  • Home
  • Watch Video
  • Gallery 1
  • Gallery 2
  • Gallery 3
  • Gallery 4
  • Gallery 5
  • Wyoming Woodturner
  • ETSY

Sam Angelo At ETSY

ETSY AD
Filters
List of articles in category Videos and Notes
Title Author Hits
Completing a Rough-Turned Elm Bowl with Sam Angelo Written by WYOMINGWOODTURNER Hits: 3
Finishing the Bottom of a Hollow Form and With a Threaded Lid with Sam Angelo Written by WYOMINGWOODTURNER Hits: 2
Notes From the Turning Shop December 2020 with Sam Angelo Written by WYOMINGWOODTURNER Hits: 21
Box Wood Box--- Lid detail Part 2 with Sam Angelo Written by WYOMINGWOODTURNER Hits: 51
Turning a Bowl with a Faceplate and Waste Block: (No Scroll Chuck) with Sam Angelo Written by WYOMINGWOODTURNER Hits: 65
Working on Unfinished Projects with Sam Angelo Written by WYOMINGWOODTURNER Hits: 44
Turning a Box wood, Threaded Box-Part I with Sam Angelo Written by WYOMINGWOODTURNER Hits: 42
Completing a Cored Box Elder Bowl Blank with Sam Angelo Written by WYOMINGWOODTURNER Hits: 48
Turning a Tiny Mesquite Bowl with Sam Angelo Written by WYOMINGWOODTURNER Hits: 65
Base Camp Dust Mask Review with Sam Angelo Written by WYOMINGWOODTURNER Hits: 60

Page 1 of 61

  • 1
  • 2
  • 3
  • 4
  • ...
  • 6
  • 7
  • 8
  • 9
  • 10
  • You are here:  
  • Home
  • Watch Video

Advertisement Top 4

40/40 Setup Block

(2574)

More Ron Brown's Best

(2450)

Longworth Type 2 Combo

(2322)

Doughnut Chuck Lite

(2192)


Powered by OrdaSoft!

Most Read

  • Sharpening a Bowl gouge with Swept-back Wings: Woodturning and Sharpening
  • Moving Forward----Sam Angelo, woodturning
  • DETAIL GOUGE---WoodTurning Fundamentals Sam Angelo
  • Completing a Rough-Turned Bowl on the Wood Lathe
  • Ron Brown's "Universal" And "Quad" Setting Jigs------- Review by Sam angelo
  • Jam Chuck for Reversing a Turned bowl
  • FUNdamentals of Woodturning: Sharpen a Scraper
  • Making a Point Tool with Sam Angelo
  • Oneway 1224 Lathe modifications
  • Making and Using a Friction drive: Woodturning
Main Menu
  • Home
  • Watch Video
  • Gallery 1
  • Gallery 2
  • Gallery 3
  • Gallery 4
  • Gallery 5
  • Wyoming Woodturner
  • ETSY

We have 88 guests, no bots and no members online

Tweet
Instagram
Powered by OrdaSoft!

Back to Top

© 2021 Sam Angelo